Project overview

The National Liquefaction Model (NLM) is New Zealand’s first publicly available national-scale model for understanding liquefaction susceptibility and potential land damage.

Developed by Tonkin + Taylor in partnership with the Natural Hazards Commission, the NLM brings together national geospatial, geomorphology and groundwater datasets with liquefaction assessments informed by approximately 60,000 ground investigations.

The NLM represents a step change. It is modular, transparent and designed to be updated as new data and science become available. With components that can be tested, improved, reused or replaced without rebuilding the entire model, the NLM can evolve as New Zealand’s understanding of liquefaction improves, as new ground investigations are completed and as groundwater and as climate conditions change.

The result is a consistent, locally informed and updateable evidence base to support insurance, planning, infrastructure, research and disaster resilience decisions across New Zealand.

Access the portal here

NLM Portal

For further information and resources: Natural Hazards Commission Toka Tū Ake

Services

  • Geotechnical earthquake engineering
  • Natural hazards and risk
  • Climate + sustainability
  • Data and geospatial analysis
  • Land use planning
  • Loss modelling

Client

  • Natural Hazards Commission

Year

  • 2023 – 2026

The challenge

Liquefaction can turn strong earthquake shaking into severe damage to land, buildings and infrastructure. The Canterbury Earthquake Sequence demonstrated the scale of this risk, with estimates showing liquefaction responsible for around 15% of claims but approximately 55% of total financial loss. It also showed that liquefaction risk depends heavily on local ground and groundwater conditions.

Before the NLM, New Zealand’s liquefaction information was fragmented. Some regions had detailed local studies, while others had limited or inconsistent information. National approaches provided broader coverage but often relied on general indicators rather than direct ground investigation data.

Local studies could offer greater confidence, but they were not nationally consistent and could not easily support decisions across insurance, planning, infrastructure, research and government.

What was needed, was a way to understand liquefaction risk at a national scale without losing sight of local conditions.

Innovations and solutions

Tonkin + Taylor and the Natural Hazards Commission developed the NLM to connect national coverage with local evidence. This gives users a common national reference point for comparing liquefaction susceptibility across regions, while allowing higher-quality local information to improve the model where it exists.

The model covers New Zealand’s flatland areas, where approximately 90% of residential dwellings are located. It combines:

  • National geospatial, geomorphology and groundwater datasets
  • Liquefaction assessments informed by approximately 60,000 ground investigations
  • Groundwater and sea-level-rise scenarios
  • Liquefaction vulnerability assessments
  • Probability of land damage modelling
  • Automated processing and spatial analysis
  • Groundwater and sea-level-rise scenarios

Comparable information for better decisions

Liquefaction risk is designed for multiple purposes. The NLM has been designed so different users can apply the same national model (or selected components of it) to different decisions. It provides a stronger evidence base before the next major earthquake, helping decision-makers move from broad assumptions and disconnected studies towards consistent, nationally comparable risk information.

“The NLM’s strength is more than just the science. T+T brought geotechnical engineers, hydrogeologists, geologists, digital specialists, insurers, infrastructure stakeholders, local government and researchers together to create a national model people can trust and use.” James Russell, Sector Director – Finance + Insurance, Tonkin + Taylor

Please note, the model does not provide information about liquefaction risk for an individual property or neighbourhood. Because of this, it is not suitable for:

  • making building consent decisions or other site-specific assessments
  • setting or changing retail insurance premiums
  • determining individual property values.

If you need advice about a specific property, talk to a qualified geotechnical professional

Insurance and financial loss modelling

For the Natural Hazards Commission, the NLM has significantly improved national catastrophe loss modelling.

Liquefaction can now be represented across New Zealand’s flatland areas, rather than being limited to the three regions where pilot models previously existed. This provides broader national coverage and supports more informed decisions about financial exposure and reinsurance.

Better loss modelling also supports confidence in New Zealand’s natural hazards insurance arrangements — an important part of household recovery, community resilience and post-disaster wellbeing.

Insurers and reinsurers can use the model to better understand where liquefaction exposure may be concentrated and how risk varies between regions.

Helping councils plan for resilience

The NLM provides councils and planners with a consistent technical reference point for local hazard mapping and land-use planning. Rather than starting from a blank page, councils can use the NLM as a national baseline, then refine their understanding with local data and more detailed assessment where appropriate.

Automated Liquefaction Vulnerability Category maps can help councils:

  • Compare existing local mapping with a nationally consistent model
  • Identify areas where information is limited or inconsistent
  • Target further investigation where uncertainty or potential risk is greatest
  • Avoid duplicating work across districts
  • Support more informed planning and resilience decisions

Infrastructure and climate-risk work

The NLM is already supporting applications beyond national catastrophe loss modelling.

Its groundwater module has informed groundwater assessment for the Pegasus Highway Upgrade, while the approach has also been applied in climate-risk work in Hawke’s Bay.

These applications demonstrate the value of a modular model. Individual components can be applied to different projects and decisions, including infrastructure planning, climate adaptation and multi-hazard risk assessment.

The model also incorporates groundwater and sea-level-rise scenarios, helping users consider how changing conditions may influence future liquefaction vulnerability.

Advancing research and natural hazard science

The NLM provides researchers with a national dataset to support further investigation into liquefaction, seismic site conditions and multi-hazard risk.

The University of Canterbury is using the model to support the development of a national VS30 seismic site condition model. The University of Auckland is using it to compare liquefaction with other natural hazards and assess implications for state highways, urban areas and utilities.

By making nationally consistent information available, the NLM creates opportunities for new research and helps build a stronger shared understanding of New Zealand’s natural hazard risk.

Project outcome

New Zealand now has a national, updateable and locally informed liquefaction evidence base that did not previously exist. It gives insurers, councils, researchers, infrastructure owners and risk practitioners a shared foundation for understanding liquefaction susceptibility across the country’s most populated flatland areas.

This approach provides a template for future natural hazard models in New Zealand and may be relevant to other earthquake-prone countries facing similar insurance, planning and resilience challenges.

Explore More Projects

Ōpōtiki District Council Infrastructure Strategy + Long-Term Plan Support (NZ)

Ōpōtiki District Council Infrastructure Strategy + Long-Term Plan Support (NZ)

Transport Sector Project Development Facility – Solomon Islands

Transport Sector Project Development Facility – Solomon Islands

Pacific Regional Waste Programme National Audits – Pacific-wide

Pacific Regional Waste Programme National Audits – Pacific-wide

East Coast Road Slope Stabilisation + Feasibility Study – Samoa

East Coast Road Slope Stabilisation + Feasibility Study – Samoa

Integrated urban resilience sector project – Tonga

Integrated urban resilience sector project – Tonga

Aitutaki Climate Change Risk Assessment + Design

Aitutaki Climate Change Risk Assessment + Design

Affordable Coastal Protection for Pacific Island Nations

Affordable Coastal Protection for Pacific Island Nations

Manase Beach Replenishment + Coastal Protection, Savai’i, Samoa

Manase Beach Replenishment + Coastal Protection, Savai’i, Samoa

Republic of the Marshall Islands Urban Resilience Project – Component 2

Republic of the Marshall Islands Urban Resilience Project – Component 2

previous arrow
next arrow

How can we help?

Get in touch with a Tonkin + Taylor representative today. Our friendly and knowledgeable team make it easy to find the right solution to suit your specific needs.

Get In Touch